Sewing machine problems and solutions

Sewing Machine Problems and Solutions

It does not matter whether you have plenty of experience sewing or you are still a novice, there are times when your sewing machine would start to give you problems. These problems are common and do not mean that you have to dump your machine.

In this article, you would learn some of these common sewing machine problems and solutions.

Some Problem and Solution

Problem One: Broken Needles

Without a good needle, you would be wasting your time sitting at the sewing machine. Using a needle that is broken or bent can be dangerous. What can you about it?


Use a new needle each time you want to start a new sewing project. Needles are not expensive so changing them regularly would not be so hard of a task. Also, make sure to choose your needle based on the kind of cloth material that you want to work on.

Jeans or denim would require that you use a needle that is sharper and sturdier than when you are working on cotton or wool.

If the needle breaks while you are working, remove it immediately and dispose of it properly. Pick up a new needle and install it to the machine. If you were previously using the wrong kind of needle, make sure to find the needle that matches the need of the material that you are working on. The simple reason for that is that without the right needle for the material, you would keep having the same problem of breaking and bending.

Read More: Juki Sewing Machine Reviews

Problem Two: Thread loops showing on the underside of the Fabric

When this happens, what it simply means is that the upper thread is not threaded correctly.


Rethread the machine. When you are rethreading, make sure that the thread sits properly in the tension mechanism and take up lever.

Problem Three: Machine not feeding fabric properly

There are a number of reasons that could cause the machine not to feed the fabric when you are sewing. These reasons are If the stitch length control is set to 0, if the feed teeth are not engaged or if the presser foot lifter has not been lowered before stepping on the foot controller.


Adjust the stitch length setting if the stitch length control was initially set to zero. Make sure to re-engage the feed dogs before you start sewing. Remember to lower the presser foot before you resume sewing.

Problem Four: Skipping stitches

Skipping stitches can be really annoying because they literally leave a loophole in your work. Skipping stitches can be caused by using the wrong needle or inserting the needle the wrong way.


Install needle into the machine the proper way. Make sure the needle is firm and that the point side is facing the material.

Also, check to see that the needle you use is right for the material that you are working on. Using a regular needle for knit material might cause some skipping. Instead, use a ball point needle for such stretch knit materials.

Problem Five: Sewing machine making weird noises

Who wants to keep working with a machine that makes a weird and strange noise?


Stop sewing immediately you notice any weird noise coming from your machine. The machine is probably due to a thorough cleaning anyway. Take your time to clean out the machine. Read the user manual to find out more about how to maintain the machine in the proper way.

After the cleaning, try sewing a piece of clothing to check if it would still make the same weird noises. If there are no noises, you can continue using the machine. If the noises continue, then you would need to take the machine to the repair shop as soon as possible.

Also Read: Necchi Sewing Machine Review


With proper maintenance and care, you can easily avoid the problems that are associated with a sewing machine. Remember to always clean it out regularly, rethread the machine and make sure that you are using the correct needle and thread for the material that you are working on.

However if the problems seem to be out of your hands, or you cannot find any help from the user manual, you should not hesitate to pay a visit to the repair shop.

Related Resources:

How To Set Up a Sewing Machine

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top